Low Temperature Impact Testing Machine Charpy Impact Tester

• After-sales Service: Lifetime
• Warranty: 2 Years
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Impact Testing Machine
• Maxcapacity: 2000kn
• Accuracy Grade: 0.5
• Load Way: Mechanical Load
• Loading Method: Dynamic Load
• Display: Computer
• Control: Digital
• Weight: 100-500Kg
• Power Source: AC380V
• Oil Cylinder Position: Under
• Trademark: CHENGYU
• Origin: China
• HS Code: 9024109000
• Production Capacity: 1000

Product Description

Low Temperature Impact Testing Machine Charpy Impact Tester

 

Product Description

 

This impact tester is an instrument for testing the impact resistance of metal materials under dynamic loads. It can continuously conduct a large number of metal impact tests. It adopts full automatic control. The control system uses programmable logic controller (PLC) to control the whole process of swing taking and impact test through computer software program. Show the impact absorbing power, the rotation angle of the pendulum and print the test report. By equipping cryogenic tank, the test can be carried out at room temperature to - 60 degrees. It is an indispensable test instrument for metallurgical, mechanical manufacturing and other units, as well as for the research of new materials in scientific research units.

 

Related standards:  ASTM E23, ISO148-2006 and GB/T3038-2002, GB/229-2007, ASTM E23-07a, GB/T 18658-2002,  JJG 145-2007

 

Features:

1. The machine is controlled by PLC. The swing, pendulum, feeding, positioning, impact and temperature adjustment settings are all electric and mechanical control. Equipped with special feeding device, automatic feeding, sample automatic end positioning. The time from discharge to impact is not more than 2 seconds, which meets the requirements of Charpy impact test at low temperature. After impacting the sample, the residual energy can be used to swing automatically, and the preparation for the next test is made, so the work efficiency is high.

2. The main engine adopts double supporting pillars, the main shaft is simply supported by beam type support and pendulum, the radial load distribution of the bearing is reasonable, the deformation of the main shaft is effectively reduced, and the energy loss caused by bearing friction is greatly reduced.

3. Using double-stage standard deceleration motor to lift hammer, running smoothly.

4. Hydraulic cushion is used for pendulum hanging device, and pendulum hanging is stable.

5. The precise design of the pendulum three-dimensional software ensures the accuracy of the strike center and the pendulum moment.

6. The impact cutter is fixed by screw, which is easy to replace.

8. The main engine is equipped with safety pins and safety net to ensure the safety of the test.

Specifications

Model	JBW-450C
impact energy	450J
Pre-rising angle of the pendulum	150°
The distance between the pendulum shaft and impact  point	750mm
Angle accuracy	0.1°
Impact speed	5.2m/s
Specimen bearer span	40mm
Sample frame bottom circle radius	2.5mm
Dip angle of supporting surface of supports	11°
Impact blame angle	30°
Thickness of impact knife	16mm
Standard specimen dimension	10mm×10(7.5/5)mm×55mm
Impact blame radius	2-2.5mm
Moment of pendulum(N.m)	450J 241.1543N.m
Cooling way	Compressor
Capacity of sample box	20
Range of low temperature	RT~ -60°c
Cooling speed	RT~0ºC     around 1.2ºC/min 0ºC~-20ºC     around 1.0ºC/min -20ºC~-60ºC    around 0.5ºC/min
Precision of controlling temperature	Fluctuation ±0.5°C grades 1°C
Speed of sending specimen	≤2S
Power supply	3phs, 380V, 50Hz
Dimensions (mm)	2200×1500×1900
Net Weight (kg)	850

Standard accessories:

1. 450 Joule mainframe;

2. 450J pendulum;

3. One motor (mounted on the main engine);

4. A set of swing drive device (mounted on the main engine);

5. A set of automatic pendulum device (mounted on the main engine);

6. A set of refrigeration temperature control device;

7. A set of automatic feeding device (mounted on the main engine);

8. A set of safety net; (totally closed);

9. One pedestal adjuster;

10. Sample alignment is one.

11. One photoelectric sensor;

12. A set of special measurement and control software;

13. Control System Set (Siemens PLC);

14. Lenovo Microcomputer Set;

15. A Color Inkjet Printer;

16. Four anchor bolts;

17. Adjust four slant bars;

18. Pressure pump set;

19. A set of low temperature systems (minimum temperature - 60 C).

 

FAQ

1. Are you a manufacturer?
Yes, we are one of the largest manufacturer of every kinds of testing machines in China. In general, every machine shipped from our factory provides 12 months of free maintenance, taking into account shipping reasons. We can extend the maintenance period for our customers for 2 months.
2. Do you have after-sales service? How can I ask? What about warranty?
Before the delivery of the equipment, we will carry out the factory inspection and the equipment will be shipped after the inspection. If your machine does not work properly, you can contact us and we will try our best to communicate with you via email or skype video chat. We promise we will reply to you within 24 hours and with 3 Within a working day to provide solutions. After confirming that it is really necessary, we can send you new parts or on-site maintenance.
The service does not include mechanical failure due to the following reasons:
(1) Wrong operation;
(2) Privately modified;
(3) Failure caused by non-equipment itself
(4) Use environment that is not suitable for equipment operation. Such as high temperature, humidity, corrosive gas or vibration.
(5) Problems caused by movement or transportation.
(6) Consumable components.
(7) Natural disasters
3. What is the delivery deadline?
Most of the time, we have inventory at the factory. If not, the delivery time is usually 15 to 20 days after receiving the payment. If you need it urgently, we can consider making special arrangements for you.
4. What kind of packaging and transportation do you use?
Under normal circumstances, we will use ordinary orders such as DHL, Fedex, UPS TNT transport. Large orders will use aviation or shipping.
5. Can the device be customized? Can I customize my own design on the device?
We can not only provide standard machines, but we can also provide customized machines according to your needs.
At the same time, we can also place your trademark on the machine.
6. What kind of packaging do you use?
Plastic sealed and sturdy wooden box.
7. What payment methods do you support?
Paypal, T/T, Western Union,L/C



Tips:We will provide you with the best quality service. If you have any questions, you can send an email to us, and we will reply to your message as soon as possible.