Cy-Ms-10A Friction Tester Four Ball Wear Tester

• After-sales Service: Lifetime
• Warranty: 2 Years
• Max Diameter of Workpiece: 3200mm
• Mass Scope of Workpiece: 10000kg
• Type: Friction Testing Machine
• Maxcapacity: >1000KN
• Model NO.: CY-MS-10A
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Transport Package: Fumigation-Free Wooden Box
• Trademark: Chengyu
• Origin: China
• HS Code: 902410
• Production Capacity: 100

Product Description

CY-MS-10A Friction tester Four Ball Wear Tester Wear Preventive Characteristics of Lubricating Grease ASTM D2783 ASTM D2266

1. Standard
The test method standards that apply to this four-ball tester include: GB3142-82 Lubricants-determination of Load-carrying Capacity (Four Balls Method) GB/T12583-1998 Lubricants-determination of Load-carrying Capacity (Four Balls Method) SH/T0189-92 Lubricant-determination of Wear Resistance Property (Four Balls Method) SH/T 0202 Grease-determination of EP Property (Four Balls Method) SH/T 0204 Grease-determination of Wear Resistance Property (Four Balls Method) IP239 ASTM D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (ASTM) ASTM D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (ASTM) JGI106 ISO 20623 ISO International Standard DIN German Standard

2. Product Paramenters

No.	Tech Indicator and Description
1	Power: AC220V±10% 50Hz (Can be changed to your country request)
2	Evaluate the Last Nonseizure load, Weld Point, LWI and Anti-wear Test for Lubricating Oil,Lubricating Grease and Cutting Solution.
3	Control the Quantity of Additives in the Lubricating Oil,Lubricating Grease and Cutting Solution.
4	Meet Requirements in ASTM, ISO, DIN, GB and SH/T.
5	Make the Wearing and Welding Tests in Same Tester.
6	Use the High Precision Servo Systems to Get Stepless Speeds.
7	Use Scar Test Method and Friction Coefficient Test Method to Achieve the Online Test.
8	Magnify the Scar From 38 to 254 Times by Shadow Electron Microscope.
9	Assemble Weights Lifter to Save Manpower.
10	Use the Industrial Computer and High-end Control Card to Achieve the High Accuracy Curve.
11	Judge the Last Nonseizure Load, Weld Point of Itself, and Calculate the LWI.
12	Converted the Test Report as PDF Format to Save and Advertise Easily.

3. Standard Accessories

No.	Description	Note	Unit	Qty
1	Certification & Manual		Copy	1 Each
2	Main Part		Set	1
3	Ordinary Oil Cup	Include:Oil Cup,Nut, Ball Seat, O Ring for Compact, Bolt.	Piece	1
4	Oil Cup for Heating	Include:Oil Cup,Nut,Ball Seat, O Ring for Compact, Heating Jacket,Bolt(With Thermocouple)	Piece	1
5	Single Blade		Piece	1
6	Assembly of Guide Pillar	Include:Guide Pillar,Thrust Bearing(51106),Guide Sleeve	Piece	1
7	Assembly of Lever	Include:Lever,Balancer	Piece	1
8	Assembly of Scale Pan(1Kg)	Include:Pylons,Rod,Scale Pan	Piece	1
9	Assembly of Scale Pan(0.5Kg)	Include:Pylons,Rod,Scale Pan	Piece	1
10	Weight	5Kg	Piece	9
11	Weight	2Kg	Piece	2
12	Weight	1Kg	Piece	1
13	Weight	0.5Kg	Piece	1
14	Weight	0.2Kg	Piece	2
15	Weight	0.1Kg	Piece	1
16	Weight	0.05Kg	Piece	1
17	Microscope	MZD0745C	Set	1
18	Seat for Microscope		Piece	1
19	Optical Standards of Piece for Microscope		Piece	1
20	Light Source for Microscope		Piece	1
21	Printer	IP100	Set	1
22	Lifter		Set	1
23	Foot Switch		Piece	1
24	Eccentric Rod		Piece	1
25	Nut for Compact		Piece	1
26	Pin Roll		Piece	2
27	Chuck		Piece	2
28	O Ring for Compact		Piece	2
29	Ball Seat		Piece	2
30	Insert	1#:H0.0mm 2#:H0.0mm	Piece	2
31	Gasket of Heat Insulation	1mm	Piece	2
32	Gasket of Heat Insulation	0.5mm	Piece	1
33	Bolt		Piece	1
34	Bolt for Oil Cup	General Oil Cup	Piece	1
35	Steel Ball	Φ12.7	Piece	200
36	Cable for Heating		Piece	1
37	Heating Jacket		Piece	1
38	Thermocouple		Piece	2
39	Fuse	Φ10×38 1A	Piece	2
40	Middle Relay	RJ1S-CLD-D24	Piece	1
41	O Ring	Φ9×2	Piece	8
42	Wrench	0-300N.M	Piece	1
43	Wrench	SE-01-100	Piece	1
44	Jacket for Oil Cup		Piece	1
45	Pylons of  Torque Wrench		Piece	1
46	Steel Ball Top Tight Stem		Piece	1
47	T Hex Wrench	7mm	Piece	1
48	Head Wrench Hook	45-52	Piece	1
49	Stay Wrench	6/10	Piece	1
50	Socket Wrench		Piece	1
51	Tweezer for Steel Ball		Piece	1
52	Chuck Steel Ball Plunger		Piece	1
53	Key for Cabinet		Piece	2
54	Manual		Copy	1
55	Software on Disk		Piece	1
56	Calculate Seat for Weight		Piece	1
57	Leds	White Light	Piece	2
58	Cable Power for Out	Include Joint	Piece	1
59	Block Ring Plier		Piece	1
60	Clean Dish		Piece	2
61	Amphibious Screwdriver	ST-201N	Piece	1
62	Screwdriver	2×50mm	Piece	1
63	Hex Wrench	4mm	Piece	1
64	Hex Wrench	1.5mm	Piece	1
65	Hex Wrench	1.2mm	Piece	1
66	Round Head Tweezer	18cm	Piece	1
67	Ink for Printer	e-820	Piece	1
68	USB Storage	4G	Piece	1
69	Sample Oil		Bottle	1
70	USB Lamp		Piece	1

FAQ

1. Are you a manufacturer?
Yes, we are professional manufacturer of every kinds of testing machines in China. In general, every machine shipped from our factory provides 12 months of free maintenance, taking into account shipping reasons. We can extend the maintenance period for our customers for 2 months.
2. Do you have after-sales service? How can I ask? What about warranty?
Before the delivery of the equipment, we will carry out the factory inspection and the equipment will be shipped after the inspection. If your machine does not work properly, you can contact us and we will try our best to communicate with you via email or skype video chat. We promise we will reply to you within 24 hours and with 3 Within a working day to provide solutions. After confirming that it is really necessary, we can send you new parts or on-site maintenance.
The service does not include mechanical failure due to the following reasons:
(1) Wrong operation;
(2) Privately modified;
(3) Failure caused by non-equipment itself
(4) Use environment that is not suitable for equipment operation. Such as high temperature, humidity, corrosive gas or vibration.
(5) Problems caused by movement or transportation.
(6) Consumable components.
(7) Natural disasters
3. What is the delivery deadline?
Most of the time, we have inventory at the factory. If not, the delivery time is usually 15 to 20 days after receiving the payment. If you need it urgently, we can consider making special arrangements for you.
4. What kind of packaging and transportation do you use?
Under normal circumstances, we will use ordinary orders such as DHL, Fedex, UPS TNT transport. Large orders will use aviation or shipping.
5. Can the device be customized? Can I customize my own design on the device?
We can not only provide standard machines, but we can also provide customized machines according to your needs.
At the same time, we can also place your trademark on the machine.
6. What kind of packaging do you use?
Plastic sealed and sturdy wooden box.
7. What payment methods do you support?
Paypal, T/T, Western Union,L/C